Use this great little solar powered light to illuminate utility areas, doorways, dark alleyways, stairwells. It will automatically illuminate its 15 super bright LED’s when motion is detected. It is easy to fit and can be fitted almost anywhere. No Electricity requires! Order yours now.

 

 

 

The Solar PIR Utility Light uses 15 super bright LEDs and is extremely versatile. It can be mounted outside and used as a motion activated security light or you can place the light inside your shed or utility room and fix the solar panel to an outside wall or to the shed roof. It will activate for 25 seconds or as long as it detects motion. This solar powered PIR utility light is also perfect for use as a welcome light. Simply fit it above your front door and it will activate when you have visitors or simply help you find the key hole at night. It will automatically switch itself off.

 

The PIR motion sensor will detect movement up to 6.5m (21ft) away. Both the light and the solar panel are fully adjustable so that you can direct the light to suit your needs. The 15 super bright LED's are used in place of normal halogen bulbs and will last so long that you will never have to replace any bulbs.

Electricity is not needed because this light, like our others, it has a solar panel which can be mounted up to 4.8m away from the light which will charge the internal rechargeable lights and power the light throughout the night, making it 100% free to run! Plus, this solar powered PIR light will work all year round, even in the UK.

Solar PIR Utility Light Benefits

- No mains wiring or electricity (Can be installed anywhere, perfect for the bottom of your garden)
- Very easy to install
- LED's mean you never have to replace a light bulb again
- Free to run
- Works all year round
- No need to pay expensive electricians fees
- No running costs

Solar PIR Utility Light Features

- Can be used outside as a solar security light or inside as a solar shed light
- Will light for 16 hours once fully charged
- Will light for 25 seconds once motion is detected
- 15 Super bright LEDs 9000MCD
- 4.8m of cable between solar panel and light
- 0.6W Polycrystalline solar panel
- Rechargeable batteries: 3 x AAA Ni-MH 750MAH (included)
- PIR detection range 2m to 6.5m
- Fully weather resistant
- No operating cost
- Batteries, screws, raw plugs, instructions and mounting bracket included.

Dimensions

Light Body: W: 13cm, D: 9cm, H: 13cm
Solar Panel: 190mm x 130mm
Boxed weight: 0.48KG

How to install this solar PIR Utility Light

Inside the box, you will find a fully adjustable light unit, fully adjustable solar panel with attached 4.8m cable, screws and wall plugs.

1. Fit the light unit to the wall.
2. Fit the solar panel no more than 4.8m away from the light unit.
3. Plug the cable of the solar panel into the light unit.

Tools Required

Crosshead screwdriver
Electric drill
Correct drill bit (Masonry, wood, or other depending on where you will fit this unit)

 

Take a look at our solar lighting page for the full range of security lights available.